frsky uk forumA self-help group for anyone having problems or indeed anybody that can help with FrSKY products.
Notifications
Clear all

FrSky Archer SR6 ACCESS Giro Receiver

Cliff
(@cliff)
Admin Admin
Archer sr6 1

The Archer SR6 are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer, they have 6 high-precision PWM channel outputs and features multiple flight modes and configuration methods. They support full-range signal strength with dual detachable antennas it guarantees optimal antenna-reception and maximum range. In addition to all this, the SR6 can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with an SBUS port.

All of the Archer receivers are hyper-matched with the ACCESS protocol. They not only feature wireless firmware upgrades and increased range and telemetry performance, the SR6 now supports more functions like configurable telemetry power, S.Port/F.Port/F.Port 2.0 switching and FLR output. Additional valuable features are under development to unlock the true potential of the ACCESS protocol.

 

Features:

 

  • ACCESS protocol with Over The Air (OTA)
  • Built-in 3-axis gyroscope and 3-axis accelerometer sensor
  • Multiple flight modes and configuration methods (LUA & Freelink)
  • Supports signal redundancy (SBUS In)
  • Full control range with telemetry
  • S.Port / F.Port / F.Port 2.0
  • External battery / device voltage detection

 

Specifications:

 

  • Dimension: 47.5 x 20.5 x 11mm (L*W*H)
  • Weight: 13g
  • 16/24 Configurable SBUS Channels
  • 6 High-precision PWM Channels
  • Operating Voltage Range: 3.5 -10V
  • Operating Current: <60mA@5V
  • Control Range: Full range* with telemetry
  • (*Full Range: >2km, range may vary based on local conditions.)
  • Voltage Measurement Range via AIN2 (External device): 0-3.3V
  • Compatibility: All FrSky ACCESS transmitters
Quote
Topic starter Posted : 30/11/2020 4:57 pm
Barry Cole
(@barrycole)
Member Admin
It seems that the latest firmware for the SR6, does not react to CH12. The self check has to be started from the LUA script. However, it seems that the latest LUA on their website, does not include this function.
 
The correct one is here:-  link to downloads: https://www.frsky-rc.com/archer-sr6/
 
ReplyQuote
Posted : 13/05/2022 8:35 am
Share: