frsky uk forumA self-help group for anyone having problems or indeed anybody that can help with FrSKY products.

[Sticky] FrSky G-RX6 Receiver  

  RSS
Cliff
(@cliff)
Admin Admin

frsky g rx6 5 540x400

The new G-RX6 receiver boast lower latancy and improved range on the current X6R receiver

This FrSky G-RX6 is designed for use with Gliders with built in vario sensor, this will give you telemetry data like altitude and vertical speed. The G-RX6 features 6 PWM outputs with higher precision and lower latency. The latency of the PWM output is 9ms less than that of the X6R, in high speed mode. It also supports the redundancy function, so it can be used in conjunction with other receivers. The G-RX6 and the whole RX-line has a 40% increased operating range compared to the previous X series receivers.

Features:

  • Small and High sensitivity (40% increase of the range compared to previous X series receivers)
  • Integrated with high precision variometer sensor
  • Higher precision PWM and Low latency PWM output
  • Lower power consumption
  • Redundancy function supported
  • Smart Port enabled and telemetry data transmission supported
  • Battery voltage detection supported
  • 2 detachable IPEX 4 Connector antennas
  • PCB protection with the comformal coating craftwork

Specification:

  • Dimension: 21.1×13×7.3mm (L×W×H)
  • Weight: 2.2g / 2.6g (with two antennas)
  • Number of Channels: 16CH (1-6CH PWM from conventional channel outputs, 1-16CH from SBUS OUT port)
  • Operating Voltage Range: 3.5V-10V
  • Operating Current: 100mA@5V
  • Operating Range: >2km
  • Servo Frame Rate: 9ms (HS—High Speed Mode)/18ms (FS—Normal Speed Mode)

All files relating to the G-RX6 Receiver including manuals and firmware updates can be found here: 

G-RX6

This topic was modified 6 months ago 2 times by Cliff
Quote
Posted : 11/04/2019 12:34 pm
Topic Tags
Share: