frsky uk forumA self-help group for anyone having problems or indeed anybody that can help with FrSKY products.

[Sticky] FrSky TFR4-B 4ch lightweight 4.6g FASST Compatible Receiver  

  RSS
Cliff
(@cliff)
Admin Admin

TFR4 B 540x400

FASST 2.4G: Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode)

Futaba TF Modules: TF-8M TF-14M
1.2 Specifications:
Number of Channels: 4
Operating Voltage Range: 3.5V~10V
Operating Temperature Range: -10 deg to 80 deg
Dimension: 42x17x7mm
Weight: 4.6g
 
1.3 Features
1) Compatible with FASST 2.4G: Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode);
2) CPPM and RSSI (PWM) output - If CH3 and CH4 are connected by a jumper CH1 will output CPPM for CH1~CH8 and CH2 will output RSSI (PWM);
3) Lighter weight and physically smaller;
4) Two selectable failsafe setting options.
 
2.Setup
2.1 Bind procedure:
Turn on the transmitter connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid the binding process is completed and the receiver is operating normally.
2.2 Setting failsafe:
TFR4-B support two selectable failsafe setting options either use native failsafe position preset on the transmitter side or set failsafe on TFR4-B.
2.2.1 Use native failsafe position preset on the transmitter side:
If not disabling failsafe on the transmitter side TFR4-B will use native failsafe position preset on the transmitter side.
2.2.2 Set failsafe on TFR4-B side:
TFR4-B supports failsafe function for all channels. Follow the steps below to set failsafe on TFR4-B:
1) Bind the receiver first and disable failsafe on the transmitter side
2) Set all transmitter controls to the desired failsafe position
3) Press briefly the F/S button of the receiver the GREEN LED of the receiver will flash twice indicating the failsafe is set up successfully.
If you do not need the failsafe function any more just re-bind the receiver to set default failsafe mode.
Hint: If not disabling failsafe on the transmitter side TFR4-B will use native failsafe position preset on the transmitter side.
2.3 LED status:
TFR4 B 540x400 chart

3. How to get CPPM and RSSI from TFR4-B
If CH3 and CH4 are connected by a jumper CH1 will output CPPM for CH1~CH8 and CH2 will output RSSI (PWM).
 
All files related to the TFR4-B 4ch lightweight 4.6g FASST Compatible Receiver including manuals and OS updates are available here: 

TFR4B

This topic was modified 7 months ago by Cliff
This topic was modified 6 months ago by Cliff
Quote
Posted : 11/04/2019 2:01 pm
Topic Tags
Share: